Development of the MCDM fuzzy LMAW-grey MARCOS model for selection of a dump truck
DOI:
https://doi.org/10.31181/rme20008012023tKeywords:
Selection, Dump truck, Truck, MCDM, Fuzzy LMAW, Grey MARCOSAbstract
This study presents the MCDM model created for the selection of a dump truck for the needs of the army engineering units, based primarily on the truck’s construction features and purchasing and maintenance costs. In this study was used the Methodology of Additive Weights (LMAW) in Fuzzy surrounding for determination of weight coefficients of criteria, while for the selection of the optimal alternative (for a dump truck) it was used the Measurement of Alternatives and Ranking according to Compromise Solution (MARCOS) method, modified by interval grey numbers. Input data for this methodology were obtained by engaging experts. Finally, the analysis was made of the sensitivity of output results of the proposed MCDM methodology to the change of weight coefficients of criteria, as well as the comparison of the obtained results with the results of other methodologies. In the conclusion, the proposed model showed stability but it was sensitive to weight coefficients change which should be taken into account by defining the same by experts.
References
Abdulshahed, A. M., Badi, I. A. & Blaow, M. M. (2017). A grey-based decision-making approach to the supplier selection problem in a steelmaking company: a case study in Libya. Grey Systems: Theory and Application, 7,385-396.
Arvanitis, A., Furxhi, I., Tasioulis, T., & Karatzas, K. (2021). Prediction of the effective reproduction number of COVID-19 in Greece. A machine learning approach using Google mobility data. Journal of Decision Analytics and Intelligent Computing, 1(1), 1–21.
Badi, I., & Abdulshahed, A. (2021). Sustainability performance measurement for Libyan Iron and Steel Company using Rough AHP. Journal of Decision Analytics and Intelligent Computing, 1(1), 22–34.
Badi, I., & Pamucar, D. (2020). Supplier selection for steelmaking company by using combined Grey-MARCOS methods. Decision Making: Applications in Management and Engineering, 3(2), 37-48.
Badi, I., Shetwan, A., & Hemeda, A. (2019). A grey-based assessment model to evaluate health-care waste treatment alternatives in Libya. Operational Research in Engineering Sciences: Theory and Applications, 2(3), 92-106.
Baykasoğlu, A., Kaplanoğlu, V., Durmuşoğlu, Z. D., & Şahin, C. (2013). Integrating fuzzy DEMATEL and fuzzy hierarchical TOPSIS methods for truck selection. Expert Systems with Applications, 40(3), 899-907.
Biswas, S. (2020). Measuring performance of healthcare supply chains in India: A comparative analysis of multi-criteria decision making methods. Decision Making: Applications in Management and Engineering, 3(2), 162-189.
Biswas, S., Majumder, S., & Dawn, S. K. (2022). Comparing the Socioeconomic Development of G7 and BRICS Countries and Resilience to COVID-19: An Entropy–MARCOS Framework. Business Perspectives and Research, 10(2), 286–303.
Božanić, D. I., Pamučar, D. S., & Karović, S. M. (2016). Application the MABAC method in support of decision-making on the use of force in a defensive operation. Tehnika, 71(1), 129-136.
Božanić, D. I., Slavković, R. V., & Karović, S. M. (2015). Model of fuzzy logic application to the assessment of risk in overcoming the water obstacles during an army defensive operation. Vojno delo, 67(4), 240-260.
Božanić, D., Pamučar, D., Milić, A., Marinković, D., & Komazec, N. (2022). Modification of the Logarithm Methodology of Additive Weights (LMAW) by a Triangular Fuzzy Number and Its Application in Multi-Criteria Decision Making. Axioms, 11(3), 89.
Bozanic, D., Tešić, D., Marinković, D., & Milić, A. (2021). Modeling of neuro-fuzzy system as a support in decision-making processes. Reports in Mechanical Engineering, 2(1), 222-234.
Canadian Patents Database. Raising and lowering and spreading device for truck bodies. (2022). http://ic.gc.ca/opic-cipo/cpd/eng/patent/203004/summary.html?query=203004&type=basic_search. Accessed 22 November 2022.
Chakraborty, S., & Prasad, K. (2016). A QFD-based expert system for industrial truck selection in manufacturing organizations. Journal of Manufacturing Technology Management, 27(6), 800-817.
Chakraborty, S., Mallick, B., & Chakraborty, S. (2022). Mining of association rules for treatment of dental diseases. Journal of Decision Analytics and Intelligent Computing, 2(1), 1–11.
Demir, G. (2022). Evaluation of the Global Multidimensional Poverty Index by Fuzzy LMAW Method: Journal of Quantitative Research in Social Sciences, 2(1), 67–77.
Deng, J.-L. (1982). Control problems of grey systems. Systems & Control Letters, 1, 288-294.
Deveci, M., Gokasar, I., Castillo, O., & Daim, Tugrul. (2022). Evaluation of Metaverse integration of freight fluidity measurement alternatives using fuzzy Dombi EDAS model. Computers & Industrial Engineering, 174.
dos Santos Jesus, L., Lapasini Leal, G. C., Cardoza Galdamez, E. V., & Rodrigues Lima Junior, F. (2020). Decision-making support for truck selection: a systematic review. Dyna, 87(212), 169-178.
Đukić, Đ.N.,Petrović, I., Božanić, D, & Delibašić, B. (2022). Selection of Unployed Aircraft for Training of Small-Range Aircraft Defense System AHP – TOPSIS Optimization Methods. Yugoslav Journal of Operations Research, 32(3), 389-406.
Durmić, E., Stević, Ž., Chatterjee, P., Vasiljević, M., & Tomašević , M. (2020). Sustainable supplier selection using combined FUCOM – Rough SAW model. Reports in Mechanical Engineering, 1(1), pp. 34-43.
Gayen, S., Jha, S.,Singh M.K., Prasad A.K. (2021). On Anti-Fuzzy Subgroup. Yugoslav Journal of Operations Research, 31(4), 539-546.
Görçün, Ö. F. & Küçükönder, H. (2022). Evaluation of the Transitions Potential to Cyber-Physical Production System of Heavy Industries in Turkey With a Novel Decision-Making Approach Based on Bonferroni Function. Verimlilik Dergisi, Dijital Dönüşüm ve Verimlilik, 1-16.
Gorcun, O. F., Senthil, S., & Küçükönder, H. (2021). Evaluation of tanker vehicle selection using a novel hybrid fuzzy MCDM technique. Decision Making: Applications in Management and Engineering, 4(2), 140-162.
Hristov, S. (1978). Organization of engineering works (Only in Serbian: Organizacija inžinjerijskih radova). Belgrade: VIZ.
Jovčić, S., Simić, V., Průša, P., & Dobrodolac, M. (2020). Picture Fuzzy ARAS Method for Freight Distribution Concept Selection. Symmetry, 12(7), 1062.
Karbassi Yazdi, A., Tan, Y., Spulbar, C., Birau, R., & Alfaro, J. (2022). An Approach for Supply Chain Management Contract Selection in the Oil and Gas Industry: Combination of Uncertainty and Multi-Criteria Decision-Making Methods. Mathematics, 10(18), 3230.
Liu, S., Fang, Z., Yang, Y., & Forrest, J. (2012). General grey numbers and their operations. Grey Systems: Theory and Application, 2 (3), 341-349.
Malli, T., Yetkin, M. E., & Ozfirat, M. K. (2021). Truck selection with the fuzzy-WSM method in transportation systems of open pit mines. Tehnički vjesnik, 28(1), 58-64.
Milosavljević, M., Kasalica, S., & Matić, M. (2018). The selection of optimal transport vehicle using multi criteria decision making methods. In Proceedings of the 2nd International Conference on Management, Engineering and Environment (ICMNEE 2018), Belgrade, Serbia, 11-12.
Milovanović, V. R., Aleksić, A. V., Sokolović, V. S., & Milenkov, M. A. (2021). Uncertainty modeling using intuitionistic fuzzy numbers. Military Technical Courier, 69(4), 905-929.
Mustafa, S., Bajwa, A. A., & Iqbal, S. (2022). A New Fuzzy Grach Model to forecast Stock Market Technical Analysis. Operational Research in Engineering Sciences: Theory and Applications, 5(1), 185-204.
Özdağoğlu, A., Keleş, M. K., & Ustaömer, T. C. (2021b). Performance Evaluation of Ground Operations Agents With Grey PIPRECIA and Grey MARCOS. Transport & Logistics, 21(51), 43-57.
Özdağoğlu, A., Öztaş, G. Z., Keleş, M. K., & Volkan, G. E. N. Ç. (2021a). An Integrated PIPRECIA and COPRAS Method under Fuzzy Environment: A Case of Truck Tractor Selection. Alphanumeric Journal, 9(2), 269-298.
Pamučar, D., Božanić, D., Đorović, B. (2011). Fuzzy logic in decision making process in the Armed Forces of Serbia. Saarbrücken: LAP Lambert Academic Publishing.
Pamučar, D., Đorović, B., Božanić, D., Ćirović, G. (2012) Modification of the dynamic scale of marks in analytic hierarchy process (AHP) and analytic network approach (ANP) through application of fuzzy approach, Scientific Research and Essays, 7(1), 24-37.
Pamucar, D., Simic, V., Lazarević, D., Dobrodolac, M., & Deveci, M. (2022). Prioritization of sustainable mobility sharing systems using integrated fuzzy DIBR and fuzzy-rough EDAS model. Sustainable Cities and Society, 82, 103910.
Pamucar, D., Yazdani, M., Montero-Simo, M. J., Araque-Padilla, R. A., & Mohammed, A. (2021b). Multi-criteria decision analysis towards robust service quality measurement. Expert Systems with Applications, 170, 114508.
Pamučar, D., Žižović, M., Biswas, S., & Božanić, D. (2021a). A new Logarithm Methodology of Additive Weights (LMAW) for multi-criteria decision-making: Application in logistics. Facta Universitatis, Series: Mechanical Engineering, 19(3), 361-380.
Planić, J. M. (2022). Defining risks on road sections during the transport of dangerous goods in the Serbian army using the linear mathematical programming model. Military technical courier, 70(4), 939-971.
Puška, A., Božanić, D., Nedeljković, M., & Janošević, M. (2022). Green Supplier Selection in an Uncertain Environment in Agriculture Using a Hybrid MCDM Model: Z-Numbers–Fuzzy LMAW–Fuzzy CRADIS Model. Axioms, 11, 427.
Simić, V., Lazarević, D., & Dobrodolac, M. (2021). Picture fuzzy WASPAS method for selecting last-mile delivery mode: a case study of Belgrade. European Transport Research Review, 13(1), 1-22.
Stanković, M., Stević, Ž., Das, D. K., Subotić, M., & Pamučar, D. (2020). A new fuzzy MARCOS method for road traffic risk analysis. Mathematics, 8(3), 457.
Stević, Ž., Miškić, S., Vojinović, D., Huskanović, E., Stanković, M. & Pamučar, D. (2022). Development of a Model for Evaluating the Efficiency of Transport Companies: PCA–DEA–MCDM Model. Axioms, 11, 140.
Stević, Z., Pamučar, D., Puška, A., & Chaterjee, P. (2020). Sustainable supplier selection in healthcare industries using a new MCDM method: Measurement of Alternatives and Ranking according to COmpromise Solution (MARCOS). Computeras and Industrial Engineering, 140, 106231.
Subotić, M., Radičević, V., Pavlović, Z., & Ćirović, G. (2021). Development of a New Risk Assessment Methodology for Light Goods Vehicles on Two-Lane Road Sections. Symmetry, 13(7), 1271.
Švadlenka, L., Simić, V., Dobrodolac, M., Lazarević, D., & Todorović, G. (2020). Picture fuzzy decision-making approach for sustainable last-mile delivery. IEEE Access, 8, 209393-209414.
Tešić, D. Z., Božanić, D. I., Pamučar, D. S., & Din, J. (2022). DIBR - Fuzzy MARCOS model for selecting a location for a heavy mechanized bridge. Military technical courier, 70(2), 314-339.
Torkayesh, A. E., Zolfani, S. H., Kahvand, M., & Khazaelpour, P. (2021). Landfill location selection for healthcare waste of urban areas using hybrid BWM-grey MARCOS model based on GIS. Sustainable Cities and Society, 67, 102712.
Ulutaş, A., Stanujkic, D., Karabasevic, D., Popovic, G., & Novaković, S. (2022). Pallet truck selection with MEREC and WISP-S methods. Strategic Management, 27(4), 23-29.
Yavuz, M. (2016). Equipment selection by using fuzzy TOPSIS method. In IOP Conference Series: Earth and Environmental Science, 44(4), 042040. Available at https://iopscience.iop.org/article/10.1088/1755-1315/44/4/042040/pdf.
Zadeh, L. A. (1965a). Fuzzy sets and systems. In: Fox J, editor. System Theory. Brooklyn, NY: Polytechnic Press, 29-39.
Zadeh, L. A. (1965b). Fuzzy sets. Information and Control, 8(3), 338-353.
Zadeh, L. A. (1968). Fuzzy algorithms. Information and Control, 12 (2), 94-102.
Zakeri, S., Chatterjee, P., Cheikhrouhou, N., Konstantas, D., & Yang, Y. (2022). MUTRISS A New Method for Material Selection Problems using Multiple-Triangles Scenarios. Available at SSRN: https://ssrn.com/abstract=4215311 or http://dx.doi.org/10.2139/ssrn.4215311 .
