Dual solutions for MHD flow of a water-based TiO2-Cu hybrid nanofluid over a continuously moving thin needle in presence of thermal radiation

Authors

  • Seyed Mehdi Mousavi Mechanical Engineering Department, Central Tehran Branch, Islamic Azad University, Tehran, Iran
  • Mohammadreza Nademi Rostami Mechanical Engineering Department, Central Tehran Branch, Islamic Azad University, Tehran, Iran
  • Mohammad Yousefi Mechanical Engineering Department, Central Tehran Branch, Islamic Azad University, Tehran
  • Saeed Dinarvand Mechanical Engineering Department, Central Tehran Branch, Islamic Azad University, Tehran, Iran

DOI:

https://doi.org/10.31181/rme200102031m

Keywords:

Hybrid nanofluid; Dual solutions; MHD; Moving needle; Similarity transformation method

Abstract

In this analysis, the flow and heat transfer characteristics of an aqueous hybrid nanofluid with TiO2 and Cu as the nanoparticles past a horizontal slim needle in the presence of thermal radiation effect is investigated. We hope that the present research is applicable in fiber technology, polymer ejection, blood flow, etc. The Prandtl number of the base fluid is kept constant at 6.2. The needle is considered thin when its thickness does not exceed that of the boundary layer over it. Using the similarity transformation method, the governing PDEs are transformed to a set of non-linear ODEs. Then, the converted ODEs are numerically solved with help of bvp4c routine from MATLAB. Results indicate that the dual similarity solutions are obtained only when the slim needle moves in the opposite direction of the free stream. In addition, the first solutions are stable and physically realizable. Besides, the second nanoparticle's mass and also the magnetic parameter lead to decrease the range of the velocity ratio parameter for which the solution exists.

References

Che Sidik, N.A., Muhammad Adamu, I., Jamil, M.M., Kefayati, G.H.R., Mamat, R., & Najafi, G. (2016). Recent progress on hybrid nanofluids in heat transfer applications: A comprehensive review. International Communications in Heat and Mass Transfer, 78, 68–79.

Dinarvand, D. (2019). Nodal/saddle stagnation-point boundary layer flow of CuO–Ag/water hybrid nanofluid: a novel hybridity model. Microsystem Technologies, 25, 2609–2623.

Dinarvand, S., & Nademi Rostami, M. (2019). An innovative mass-based model of aqueous zinc oxide–gold hybrid nanofluid for von Kármán’s swirling flow. Journal of Thermal Analysis and Calorimetry, 138, 845–855.

Dinarvand, S., Nademi Rostami, M., & Pop, I. (2019). A novel hybridity model for TiO2-CuO/water hybrid nanofluid flow over a static/moving wedge or corner. Scientific Reports, 9, 16290.

Dinarvand, S., Nademi Rostami, M., Dinarvand, R., & Pop, I. (2019). Improvement of drug delivery micro-circulatory system with a novel pattern of CuO-Cu/blood hybrid nanofluid flow towards a porous stretching sheet. International Journal of Numerical Methods for Heat & Fluid Flow, 29, 4408-4429.

Ghadikolaei, S.S., Yassari, M., Sadeghi, H., Hosseinzadeh, K., & Ganji, D.D. (2017). Investigation on thermophysical properties of TiO2–Cu/H2O hybrid nanofluid transport dependent on shape factor in MHD stagnation point flow. Powder Technology, 322, 428–438.

Gupta, M., Singh, V., Kumar, S., Kumar, S., Dilbaghi, N., & Said, Z. (2018). Up to date review on the synthesis and thermophysical properties of hybrid nanofluids. Journal of Cleaner Production, 190, 169–192.

Hamid, A., Hashim, A., Hafeez, M., Khan, A.S., & Alshomrani, M. (2019). Heat transport features of magnetic water–graphene oxide nanofluid flow with thermal radiation: Stability Test. European Journal of Mechanics / B Fluids, 76, 434–441.

Hamzah, M.H., Nor Azwadi Che Sidik, T.L., Ken, R., Mamat, G., & Najafi, F. (2017). Factors affecting the performance of hybrid nanofluids: A comprehensive review. International Journal of Heat and Mass Transfer, 115, 630–646.

Ijaz, S., Iqbal, Z., Maraj, E.N., & Nadeem, S. (2018). Investigation of Cu-CuO/blood mediated transportation in stenosed artery with unique features for theoretical outcomes of hemodynamics. Journal of Molecular Liquids, 254, 421–432.

Ishak, I., Nazar, R., & Pop, T. (2007). Boundary layer flow over a continuously moving thin needle in a parallel free stream. Chinese Physics Letters, 24, 2895–2897.

Khashi’ie, N.S., Md Arifin, N., Pop, I., Nazar, R., Hafidzuddin, E.H., & Wahi, N. (2020). Flow and heat transfer past a permeable power-law deformable plate with orthogonal shear in a hybrid nanofluid. Alexandria Engineering Journal, 59, 1869–1879.

Lee, L.L. (1967). Boundary layer over a thin needle. Physics of Fluids, 10, 820–822.

Madhesh, D., & Kalaiselvam, S. (2014). Experimental Analysis of Hybrid Nanofluid as a Coolant. Procedia Engineering, 97, 1667 – 1675.

Moldoveanua, G.M., Mineaa, A.A., Iacob, M., Ibanescu, C., & Danu, M. (2018). Experimental study on viscosity of stabilized Al2O3, TiO2 nanofluids and their hybrid. Thermochimica Acta, 659, 203–212.

Roşca, N.C., Roşca, A.V., Aly, E.H., & Pop, I. (2016). Semi-analytical solution for the flow of a nanofluid over a permeable stretching/shrinking sheet with velocity slip using Buongiorno mathematical model. European Journal of Mechanics B/Fluids, 58, 39–49.

Sarkar, J., Ghosh, P., & Adil, A. (2015). A review on hybrid nanofluids: Recent research, development and applications. Renewable and Sustainable Energy Reviews, 43, 164–177.

Shampine, L.F., Gladwell, I., & Thompson, S. (2003). Solving ODEs with MATLAB, Cambridge University Press.

Shojaie Chahregh, H., & Dinarvand, S. (2020). TiO2-Ag/blood hybrid nanofluid flow through an artery with applications of drug delivery and blood circulation in the respiratory system. International Journal of Numerical Methods for Heat & Fluid Flow, 30, 4775-4796.

Soid, S.K., Ishak, A., & Pop, I. (2017). Boundary layer flow past a continuously moving thin needle in a nanofluid. Applied Thermal Engineering, 114, 58–64.

Tiwari, R.J., & Das, M.K. (2007). Heat transfer augmentation in a two sided lid-driven differentially heated square cavity utilizing nanofluids. International Journal of Heat and Mass Transfer, 50, 2002–2018.

Upreti, H., & Kumar, M. (2019). Influence of non-linear radiation, Joule heating and viscous dissipation on the boundary layer flow of MHD nanofluid flow over a thin moving needle. Multidiscipline Modeling in Materials and Structures, 16, 208-224.

Yousefi, M., Dinarvand, S., Eftekhari Yazdi, M., & Pop, I. (2018). Stagnation-point flow of an aqueous titania-copper hybrid nanofluid toward a wavy cylinder. International Journal of Numerical Methods for Heat & Fluid Flow, 28, 1716-1735.

Published

2021-02-20

How to Cite

Dual solutions for MHD flow of a water-based TiO2-Cu hybrid nanofluid over a continuously moving thin needle in presence of thermal radiation. (2021). Reports in Mechanical Engineering, 2(1), 31-40. https://doi.org/10.31181/rme200102031m